Tea coasters of wood

Looking for some small projects of wood, I came across on Pinterest dot com, this:

I had been cutting the long branches from the Almond tree to firewood size from my friend Ramu's hand saw.  

Take a close look at the beautiful teeth and smile!

The above is a larger mature branch.  While cutting this I saw a nice shape and 'rings'.  Why not make a tea coaster I thought.  I cut one slice to see how it would be.  It came with perfect and uniform thickness with no slant!  I did a few more having enjoyed that feel!!

The tree branch was pruned only two months ago.  Moisture in the branches takes more time to dry if not cut.  So I kept the slices in the sun to dry.  

I hung-stored the remaining portion of the branch in the '7' position in the picture below.

When the slices dried, the wood shrunk and the bark in some places got detached.  So I removed the bark.  I sanded both sides with 180 and 320 paper.  I tried colourless polish, but was not satisfied. Leaving them as they are would be nice I decided.  Here it is.

After I had made, I saw in an exhibition [north-east bamboo craftsmen] such coasters etc on sale!  See picture. 

My thanks to Ramu for making this pleasure project possible apart from the tree-branch cutting one which was more important.  Also hats off to German quality product, 'Wolf -Garten' pruning saw! 

Space-saver Shoe-rack

There was always a need for a proper place to store my several pairs of sport shoes.  It had to be in the veranda. Visiting www.pinterest.com gave me some clues, but I adapted my own when I did.  It was directly connected with the available 'junk'.

I needed two long 1x3 pieces of wood, 69 inches long, lots of patience and a large bagful of time.  And something to make the racks.  I got them all today.  

I looked for wooden beading pieces for the racks but there were not many.  So wrote it off.  Then a Eureka moment.  Two ten-feet lengths of aluminium double channels which I did not need were posing problems of storage as they were rendered useless.  These were the one that would suit.  

That is the place I wanted to have the rack.  The boxes are removed for this picture - for pre-cleaning. 

I cut the channels as per planned measurements and folded the pieces at two places.  These would serve as racks.  This was a better way of 'getting rid of them' as taking to the shop for refund or exchange was not feasible - due to its 10-feet.   They had come with other materials in a goods vehicle last year but only two other channels were of use and these two were left overs. 

Wok in progress.  The racks are being nailed to the wood.  I gave a slight slant backwards so that when the shoe box is kept, it would stay in place properly.

Rack in place. I secured the rack to the mesh behind it with wires. 

There, that is my space saver shoe rack.

Infinity Mirror - now redone

Some time ago I had posted the project as soon as I gave it a try. Now I found time to redo this with what was still needed to be done.  The light strip had been measured short.  I bought half a metre more of it and soldered it to the terminals and fixed it to complete the perimeter.  I had also wanted to add some colouring. I had some colour transparency sheet pieces.  This came in handy. I cut up small strips of the three colours I had and taped them at intervals. Closed the glass back. It is dust season now. When light is put on, all the dust trapped in it gets into view! 

Close-up.

Finished project.  Colouring is pleasing I feel.  

Close up of the infinite reflections. 

Sand bag paper weight

  I took a thick cloth and made a bag [see picture], filled fine sand and stitched it close.  That is, in short[est], about this little project!

Lo, it is a soft paperweight , a very essential item on the office desk covered by glass. Visitors to the desk pick it up and ask me what it is!  My paperweight does not crack the table glass now.

I must tell  a bit about that sand.  

From my younger days, I had seen two large bottles [a foot tall] in the kitchen in which cooking oil was kept. I remember one of them had a leak because it had a fine crack. It was discarded for storing oil and dumped in the store room.  The next I remember was sand in it, may be it was transferred from a tin can for some reason by my mother who also later told that the sand was brought from the beach of Rameshwaram, the sacred coast town near the southern tip of India. I still wonder what was the purpose of its being brought here. 

With the changes in the house that came along over the years, it was kept here and there as it was actually useless at it were.  The last stop for his sand bottle was my garden.  It was kept under some stone bench along with some other junked items.  One day when I was clearing up the items, there it lay cracked, pieces and sand spilled.  Reason is a mystery.  This is very fine sand, like powder.

I shifted some of the sand to a PET bottle and thought of using it for some purpose. There you saw the sand bag paperweight. 

Since that sand is so fine, I also plan to make one of my favourite things - an hour glass!  I have it on my to-do list since many years.  

Clothes hanger from TV antenna

In the 1980s, TV antenna in Mysore was a huge thing erected on top of the house.  It was long, wide and with 7 'elements' [directors] and one reflector.  Later when the TV transmission frequencies were changed, everyone who had to replace them with new and smaller antennas.  The aluminum pipes of the old one had only to be sold as junk.  Not me.  

Notice the smaller antenna on our house.  The old one was 5 to 6 times bigger!  Imagine the giant!

I had seen an indoor clothes hanger some time before, may be in Bombay [Mumbai].  Since our old antenna had long 'elements' this was suitable for making a clothes hanger and there was a need for one to hang dry the smaller clothes/garments indoors, esp. on wet rainy days.  I think this was in the early 90s when I made this. I have used all the nuts, bolts and clamps from the antenna. 

Observe the square tubes - two vertical and one horizontal forming the main 'frame'. Add the length of these three and gauge the length of the old antenna.   The longest 'element' [smaller round tube] in the set of seven stretched 8 feet across!  That was how big it was!  This was a common sight on houses that had TV!

This has been of great utility all these years. 

Scale cum cutter from broken parts

In the late 90s, computers had arrived in offices, including ours.  One computer monitor [tube type] had a narrow door for operating its controls.  It swung open on two slender pivots.  After some wear and tear, this fibre door had come off.  It was like a ruler. So I thought of making use of it as a ruler.  A computer part came packed with something later.  I was looking through some boxes.  There was an unusual object, orange coloured with nice smooth edges. The boxes were kept for disposal.  A 100 Watt bulb lighted up in the mind.  I picked it up.

I had somewhere, probably in some engineer's office, seen a gripping handle for a scale.  What a beautiful idea I had thought, so much easier to lift and move the flat object from paper.  This orange coloured object perfectly suited as a handle for the scale.  I stuck it to the fibre scale using strong adhesive [Araldite].

This also serves me as a tearing blade as one edge had a slight taper, much to my liking.  This enables me to press-hold the paper and tear the other portion neatly.  I clearly marked the ruler in inches which is very handy.  It is 10.5 inches.

 Just for kicks, I wrote my name in dots in the groovy pattern on the other side of the scale.  This can also be displayed, the new 'grip handle' serves as a stand!  I did this part just by instinct and with no real purpose as I do not display the name!

This is yet another of my satisfying little projects.  I still use it while it also serves as a paper weight. 

This special scale has become an indispensable tool on my work desk and one of my favourites.

Stone slabs go into a pavement

There were many granite stone slabs salvaged from the floors and portions of the 100-year old house that was divided into two equal portions 4 years ago.  I managed to pull up dozens of them for reuse in my portion.  

They were of various thicknesses and dimensions as can be seen in these 2008 photos.  

This portion was later paved with longer stones, which had to be removed after just two years.  

[Picture 2008, being laid].  The new house had not been thought of at that time. 

The odd ones were given for covering the passage floor in the adjacent new house in our portion that was built recently.  With that, much of the stone junk was gone.  But many were retained for better use.  Besides the granite stone slabs, I had salvaged many lovely Cuddapa slabs [seen stacked in the picture below] also that were used as floor of the dilapidated room that was pulled down to build that new house.  I  had got them cut from the stone smith who had to be called in for this emergency work which he is attending in this picture.  But after he did some work that eventually was a flop in the project, I got these Cuddapa slabs cut neatly disposing off the unwanted ones with the debris. 

One good, wide slab was cracked.  So I it used it in the floor of the 'tools shed' I built [another post] from mostly junk material. I arranged the neater ones in full size as floor in the tile-roofed open shed adjacent to the tools shed.  This is visible in one picture below. In front of this is the passage from our back door.  This passage ground had to be paved as most of the water coming out of the open yard was let out here and the walls are showing dampness because the soil is always moist. I had put the slabs as stepping stones as a temporary measure and had not found time for doing it neatly.  Last week, I picked up that project, staying away from work, and completing it. 

This is the passage. See those two slabs placed side by side. That is the area.  The shed frame is ready. Picture taken when work was incomplete. The better Cuddapa slabs were used as floor to that shed. 

See the shed, now having roof. See the slabs lined up. The Yarden space is also visible.  

This is the eye-level view - taken at the same time as above, 2011.

It was a small area.  It took me a full day as I had to do all the work myself.  For this, I had the small gravel saved and kept.  River sand left over from the house construction was also available.  Now I had time on hand.  Only thing was cement which I bought that morning.  43-grade Coromandel Cement, one bag.

After removing all the slabs haphazardly paved as it was a temporary measure, I checked the level of the ground for a slope in the desired direction.  I chose the slabs to lay them in a neat fashion.  This is a new picture taken just after I had placed the main slabs. Picture from the other side of the path. Door of the new house visible in the background.

The junk shed floor is behind me as I am engaged in this new project. The tools shed is just out of the frame on the left.  Tea was supplied to the spot. Do not miss to spot it!

Concrete was filled into the gaps first leaving a quarter inch at the top for nice cement-sand mix to finish neatly.  Concrete was pounded in with a hammer so that it is firmly based into the soil.

This is another dose of tea as I take a picture of the finished project. Notice the long flat cement work on the right.  I have made a very shallow drain so that rainwater or any water runs along it to reach the jasmine plant's base. I will see later if there is a real need to continue the concreting further in the pathway. I have also kept the rain barrel on the right - the brick base for it can be seen.   Barrel/tank has been kept away to facilitate work.

Finally, I did this, having felt a great necessity particularly for this portion.